Unique design forces liquid through entire length of filter. Typically absorbs 10-15 times its weight in oil.

The Absorb-Rite® filter bag from The Strainrite Companies substantially reduces oil and grease from aqueous based liquids. The Absorb-Rite® bag offers a unique two-in-one design that forces the liquid through the entire length of the filter, therefore uniformly utilizing all the absorbent media. Typically, this unique filter absorbs 10-15 times its weight in oil. The Absorb-Rite® offers in excess of 50% more absorbency than competing brands.

Download the PDF: AbsorbRite


  • Unique three layer construction results in maximum exposure time at minimum flow rate
  • The top disc pre-filter material removes dirt and other particulate material prior to the adsorption of hydrocarbons
  • Designs available to remove particles in the 1-200 micron range
  • Absorb-Rite® has higher hydrocarbon removal capacity than other filter bags on the market
  • Has higher capacity than most other bags on the market
  • Standard bags fit SRID and SRHD filter vessels (fit competitor housings as well)
  • Designed to minimize contamination during changeover

<li>Electroplating Paints</li>
<li>Liquid Fertilizers<li>
<li>Pickling Liquids<li>
<li>Cutting Oil Removal<li>
<li>Waste Water Treatment<li>

Available to fit all bag filter housings

Anywhere oil or grease must be separated and removed from an industrial stream, Absorb- Rite® bags are designed to ll the need.
Best results at low ow rates to achieve longer contact time.
• #2Size=5gpm
• #1Size=21⁄2gpm
• Estimate flows depending upon ppm oil and viscosity

Material SP – Polypropylene Felt SP
Micron Rating 1, 5, 10, 25, 50, 75, 100, 200 100
Finish S – Singed S
Size 1 – 7” x 16”
2 – 7”x 30.5”
3-4.08”x 8”
4-4.08”x 14”
*30 – 4.118” x 10”
*65 – 4.118” x 22”
*C1 – 7” x 16.5”
*C2 – 7”x 31”
Ring S – Carbon Steel
SS – Stainless Steel
P – Polypro Flange
PR – Polypro Ring
Options C – Absorb-Rite C