BRT
The Brevi-MAXX BRT cartridge provides PTFE membrane media in a compact 2.25-inch-diameter pleated cartridge. Available in 0.1 and 0.2 µm ratings, BRT is intended for fine-filtration applications in which PTFE membrane media are specified.
Technical Specifications
Filtration Performance
| Specification | Detail |
|---|---|
| Maximum Differential Pressure |
Forward: 75 psid (5.1 bar) @ 75°F (24°C), 40 psid (2.8 bar) @ 180°F (82°C) Reverse: 50 psid (3.4 bar) @ 75°F (24°C) |
| Maximum Operating Temperature | 220°F (104°C) Continuous Duty |
Materials & Compliance
| Specification | Detail |
|---|---|
| Filter Media | Polypropylene |
| End Caps / Cage / Core | Polypropylene |
| Pleat Support Material | Polypropylene |
| End Cap Insert | Polypropylene |
| Seals | Buna N, Fluorocarbon, EPDM, Silicone |
| Construction Method | Thermal bond |
| Toxicity | Cartridge materials meet USP Class VI and FDA 21 CFR Part 177 for food and beverage contact |
Advanced Features
| Specification | Detail |
|---|---|
| Sterilization |
Cartridge can be sterilized via steam-autoclave: 20 times at 275°F (135°C). Cartridge may be sanitized in place with common sanitizing agents, contact factory for chemical compatibility |
| Packaging Economy | Bulk case packaging intended to reduce packaging-material disposal: A = 2 inch (5.1 cm), B = 4 inch (10.2 cm), C = 5 inch (12.7 cm) |
Physical Specifications
| Specification | Detail |
|---|---|
| Outside Diameter | 2.25 inch (57 mm) |
| Nominal Lengths |
A = 2 inch (5.1 cm) B = 4 inch (10.2 cm) C = 5 inch (12.7 cm) |
| Approximate FDA-Grade Surface Area |
2" (A) - 1.28 sq.ft. 4" (B) - 2.32 sq.ft. 5" (C) - 2.45 sq.ft. |
Product Overview
The Brevi-MAXX BRT cartridge provides PTFE membrane media in a compact 2.25-inch-diameter pleated cartridge.
Available in 0.1 and 0.2 µm ratings, BRT is intended for fine-filtration applications in which PTFE membrane media are specified.
The cartridge’s small size supports pilot-scale, point-of-use, and OEM installations while helping reduce system hold-up. Multiple lengths, endcaps, and seal materials allow the configuration to be matched to the housing and process requirements.
Features & Benefits
Charged nylon 6,6 custom polyester membrane media
General, FDA, and Pharmaceutical-grade configurations
Designed for endotoxin-reduction applications
Compact design for reduced hold-up
Micron Ratings: 0.05, 0.1, 0.2, and 0.45 µm
Optimized pleating maximizes flow and life performance
Markets & Applications
Pharmaceutical
Nutraceuticals
Food & Beverage
Electronics
Chemical Feeds
Filling Lines
Point of Use (POU) Water
Point of Use (POU) Air
